WACKER E 41 M
Wacker E 41 M is aqueous silicone fluid emulsion containing un-reactive medium-viscosity polydimethylsiloxane.
The emulsion creates a thin but highly effective parting film. It does not carbonise or gum even at temperatures which would quickly destroy organic mould release agents, does not build up moulds, and does not discolour or damage rubber or plastics.
Features
Wacker E 41 M
- Excellent high temperature resistant
- Excellent non-stick properties in contact with sticky substances
- Excellent water repellency
WACKER SILICONE HS
WACKER SILICONE HS emulsion is a water dilutable release agent having 20% dimethyl polysiloxane together with non-fugitive1, essentially non-ionic emulsifier. It is an effective and widely used release agent for rubber.
WACKER SILICONE HS provides following advantages over conventional dimethyl polysiloxane emulsions:
- Imparts excellent shinning on natural rubber surface and also on EVA sheet.
- Excellent mould release agent for rubber.
- Leaves no tarry, carbonaceous residue on the mould.
- Has good emulsion stability, both as supplied and in diluted form.
- Stable at temperatures as high as 50ºC and as low as 0ºC.
- Low cost.
WACKER E 74M
WACKER E 74M is a non-fugitive and primarily non-ionic emulsion containing 35% dimethyl silicone fluid. It is an effective and widely used release agent for rubber. This emulsion creates a thin but highly effective parting film. It does not carbonise or gum even at temperatures which would quickly destroy organic mould release agents, does not build up on moulds, and does not discolour or damage rubber or plastics.
WACKER E 74M gives an excellent surface finish to moulded parts. The reason for this characteristic is that the average particle size of WACKER E 74M is 0.5 microns. This fine particle size also contributes to the excellent release properties and the stability is excellent of both diluted and undiluted emulsion. WACKER E 74M is suitable for EVA release application without any build up in the mould.
WACKER Fluid 1000
Structural formula:
WACKER Fluid 1000 is a linear, non-reactive polydimethyl siloxane with a viscosity of approx. 1 000 mm²/s. Due to its chemical structure, WACKER Fluid 1000 has an outstanding property profile, which sets it apart from organic materials such as mineral oils.
Properties
WACKER Fluid 1000 is a clear, odorless and colorless liquid.